Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Duty | Standard-Duty |
| Paint Code | A |
| Splines | 6 |
| Mounting Holes | 3/8-16 |
| Pressure [Max] | 1800 psi |
| Material | Cast Iron |
| Mounting Type Code | B |
| Shaft Size & Type | 1 in - 6T Spline |
| Pilot Diameter | 1.75 in |
| Port Code | B |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Port Type | NPTF |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Special Features Hardware Code | AA |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| RPM [Max] | 1021 rpm |
| Special Features | Free Running Gerotor |
| Mounting Hole Size | 3/8 in |
| Case Drain Code | 0 |
| RPM [Min] | 1021 rpm |
| Bolt Circle Dia. | 3 1/4 in |
| Flow Rate | 9.5 gal/min |
| Port Size & Location | 1/2 in NPTF Side |
| Output Shaft Code | 02 |
| Mount Type | 4 Bolt |
| Flange Orientation | Standard |
| Motor Element | Gerotor |
| Port Size | 1/2, 1/2-14 |
| Series | H Series |
| Displacement (in³/rev) | 2.2 |
| Rotation | Standard Rotation |
| Flow [Max] | 10 gal/min |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Type | Splined |
| Case Drain | None |
| Geroter/Geroler Options | Free Running |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Weight | 11.2 LB |
