Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Flow Rate | 9.5 gal/min |
| Pressure [Max] | 1800 psi |
| Shaft Size & Type | 1 in - 6T Spline |
| Paint Code | A |
| Geroter/Geroler Options | Free Running |
| Series | H Series |
| Seal Material | Buna-N |
| Port Size & Location | 1/2 in NPTF Side |
| RPM [Max] | 1021 rpm |
| Mount Type | 4 Bolt |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 2.2 |
| Material | Cast Iron |
| Motor Element | Gerotor |
| Pilot Diameter | 1.75 in |
| Port Code | B |
| Corrosion Resistant | No |
| Port Type | NPTF |
| Flow [Max] | 10 gal/min |
| Special Features | Free Running Gerotor |
| Output Shaft Code | 02 |
| Mounting Type Code | B |
| Special Features Hardware Code | AA |
| Port Size | 1/2, 1/2-14 |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Shaft Type | Splined |
| Rotation | Standard Rotation |
| Mounting Holes | 3/8-16 |
| Case Drain Code | 0 |
| Duty | Standard-Duty |
| Flange Orientation | Standard |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Min] | 1021 rpm |
| Special Features Assembly Code | 0 |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Splines | 6 |
| Mounting Hole Size | 3/8 in |
| Case Drain | None |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Weight | 11.2 LB |
