Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Location | Side Port |
| RPM [Max] | 469 rpm |
| Seal Material | Buna-N |
| Material | Cast Iron |
| Port Type | Manifold |
| Port Code | C |
| Splines | 0 |
| Special Features Hardware Code | 00 |
| Mounting Type Code | B |
| Case Drain | None |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 3 1/4 in |
| Duty | Standard-Duty |
| RPM [Min] | 469 rpm |
| Flow [Max] | 15 gal/min |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Series | H Series |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Mounting Holes | 3/8-16 |
| Case Drain Code | 0 |
| Special Features | None |
| Pilot Diameter | 1.75 in |
| Flow Rate | 15 gal/min |
| Displacement (in³/rev) | 7.3 |
| Pressure [Max] | 1800 psi |
| Corrosion Resistant | No |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Element | Gerotor |
| Mount Type | 4 Bolt |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Paint Code | A |
| Output Shaft Code | 01 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Hole Size | 3/8 in |
| Weight | 12.1 LB |
