Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Flange Orientation | Standard |
| RPM [Max] | 469 rpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Output Shaft Code | 01 |
| Mounting Holes | 3/8-16 |
| Motor Element | Gerotor |
| Mounting Hole Size | 3/8 in |
| Special Features | None |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Motor Type | Spool Valve |
| Port Code | C |
| Flow Rate | 15 gal/min |
| Mounting Type Code | B |
| Seal Material | Buna-N |
| Bolt Circle Dia. | 3 1/4 in |
| RPM [Min] | 469 rpm |
| Mount Type | 4 Bolt |
| Paint Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Pressure [Max] | 1800 psi |
| Case Drain | None |
| Port Location | Side Port |
| Flow [Max] | 15 gal/min |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Splines | 0 |
| Material | Cast Iron |
| Special Features Assembly Code | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Rotation | Standard Rotation |
| Pilot Diameter | 1.75 in |
| Duty | Standard-Duty |
| Port Type | Manifold |
| Series | H Series |
| Special Features Hardware Code | 00 |
| Case Drain Code | 0 |
| Displacement (in³/rev) | 7.3 |
| Weight | 12.1 LB |
