Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 3.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Type | Manifold |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Mounting Hole Size | 3/8 in |
| Output Torque at Rated PSI (inch/pounds) | 805.42 in lb |
| Mounting Holes | 3/8-16 |
| Flow [Max] | 15 gal/min |
| Geroter/Geroler Options | Free Running |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 0 |
| Paint Code | A |
| Port Code | C |
| Splines | 0 |
| Series | H Series |
| Duty | Standard-Duty |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Type | Spool Valve |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Motor Element | Gerotor |
| Special Features | Free Running Gerotor |
| Shaft Type | Straight w/ Woodruff Key |
| Rotation | Standard Rotation |
| Pilot Diameter | 1.75 in |
| Flow Rate | 15 gal/min |
| Special Features Assembly Code | 0 |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 3 1/4 in |
| Mount Type | 4 Bolt |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Max] | 953 rpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Type Code | B |
| Special Features Hardware Code | AA |
| Displacement (in³/rev) | 3.5 |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Output Shaft Code | 01 |
| Case Drain | None |
| Weight | 11.5 LB |
