Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 3.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Output Torque at Rated PSI (inch/pounds) | 805.42 in lb |
| Bolt Circle Dia. | 3 1/4 in |
| Shaft Type | Straight w/ Woodruff Key |
| Flange Orientation | Standard |
| Paint Code | A |
| Displacement (in³/rev) | 3.5 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Duty | Standard-Duty |
| Case Drain Code | 0 |
| Series | H Series |
| Output Shaft Code | 01 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Port Location | Side Port |
| Special Features Assembly Code | 0 |
| Port Type | Manifold |
| RPM [Max] | 953 rpm |
| Geroter/Geroler Options | Free Running |
| Mounting Type Code | B |
| Rotation | Standard Rotation |
| Mount Type | 4 Bolt |
| Case Drain | None |
| Mounting Hole Size | 3/8 in |
| Special Features | Free Running Gerotor |
| Pilot Diameter | 1.75 in |
| Splines | 0 |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Port Code | C |
| Flow Rate | 15 gal/min |
| Pressure [Max] | 1800 psi |
| Flow [Max] | 15 gal/min |
| Material | Cast Iron |
| Mounting Holes | 3/8-16 |
| Special Features Hardware Code | AA |
| Inlet Pressure [Max] | 2500 psi |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Weight | 11.5 LB |
