Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Seal Material | Buna-N |
| Geroter/Geroler Options | Free Running |
| Mounting Hole Size | 3/8 in |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Corrosion Resistant | No |
| Rotation | Standard Rotation |
| RPM [Max] | 1021 rpm |
| Series | H Series |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Mount Type | 4 Bolt |
| Output Shaft Code | 01 |
| Pressure [Max] | 1800 psi |
| Mounting Type Code | B |
| Port Location | Side Port |
| Port Type | Manifold |
| Special Features Assembly Code | 0 |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 1.75 in |
| Paint Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flange Orientation | Standard |
| Special Features Hardware Code | AA |
| Case Drain | None |
| RPM [Min] | 1021 rpm |
| Material | Cast Iron |
| Port Code | C |
| Case Drain Code | 0 |
| Splines | 0 |
| Displacement (in³/rev) | 2.2 |
| Flow Rate | 10 gal/min |
| Special Features | Free Running Gerotor |
| Bolt Circle Dia. | 3 1/4 in |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Holes | 3/8-16 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow [Max] | 10 gal/min |
| Weight | 11.2 LB |
