Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Splines | 0 |
| Pilot Diameter | 1.75 in |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Special Features | Free Running Gerotor |
| RPM [Max] | 1021 rpm |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Duty | Standard-Duty |
| Port Location | Side Port |
| RPM [Min] | 1021 rpm |
| Rotation | Standard Rotation |
| Shaft Type | Straight w/ Woodruff Key |
| Pressure [Max] | 1800 psi |
| Mount Type | 4 Bolt |
| Special Features Hardware Code | AA |
| Motor Element | Gerotor |
| Mounting Holes | 3/8-16 |
| Mounting Hole Size | 3/8 in |
| Case Drain | None |
| Port Type | Manifold |
| Mounting Type Code | B |
| Paint Code | A |
| Flow [Max] | 10 gal/min |
| Seal Material | Buna-N |
| Flow Rate | 10 gal/min |
| Output Shaft Code | 01 |
| Displacement (in³/rev) | 2.2 |
| Motor Type | Spool Valve |
| Series | H Series |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Case Drain Code | 0 |
| Material | Cast Iron |
| Flange Orientation | Standard |
| Geroter/Geroler Options | Free Running |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features Assembly Code | 0 |
| Port Code | C |
| Weight | 11.2 LB |
