
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 8.91 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
Special Features | None |
Maximum Speed @ Continuous Flow | 385 rpm @ 15 gal/min |
Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
Special Features Assembly Code | 0 |
RPM [Max] | 385 rpm |
Port Type | BSPP |
Flow Rate | 14 gal/min |
Output Torque at Rated PSI (inch/pounds) | 1956 in lb |
Flow [Max] | 15 gal/min |
RPM [Min] | 385 rpm |
Duty | Standard-Duty |
Bolt Circle Dia. | 4.187 in |
Mounting Holes | 0.535 in |
Series | H Series |
Material | Cast Iron |
Splines | 0 |
Corrosion Resistant | No |
Pressure [Max] | 1700 psi |
Shaft Type | Straight |
Motor Type | Spool Valve |
Case Drain Code | 2 |
Paint Code | A |
Output Shaft Code | 24 |
Paint/Packaging | Primer Low Gloss Black, Individual Box |
Mounting Type Code | A |
Rotation | Standard Rotation |
Mount Type | 2 Bolt |
Shaft Size & Type | Straight |
Displacement (in³/rev) | 8.91 |
Pilot Diameter | 3.25 in |
Seal Material | Buna-N |
Port Code | E |
Inlet Pressure [Max] | 2500 psi |
Port Size | 1/2, G 1/2 |
Mounting Hole Size | 0.565 in |
Special Features Hardware Code | 00 |
Port Location | Side Port |
Motor Element | Gerotor |
Flange Orientation | Standard |
Weight | 13.0 LB |
