Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 8.91 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Inlet Pressure [Max] | 2500 psi |
| Duty | Standard-Duty |
| Splines | 0 |
| Corrosion Resistant | No |
| Bolt Circle Dia. | 4.187 in |
| Special Features Hardware Code | 00 |
| RPM [Min] | 385 rpm |
| Port Code | E |
| Motor Element | Gerotor |
| Pilot Diameter | 3.25 in |
| Mounting Holes | 0.535 in |
| Seal Material | Buna-N |
| Displacement (in³/rev) | 8.91 |
| Series | H Series |
| Port Size | 1/2, G 1/2 |
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Flow Rate | 14 gal/min |
| Mount Type | 2 Bolt |
| Rotation | Standard Rotation |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Case Drain Code | 2 |
| Paint Code | A |
| Shaft Size & Type | Straight |
| RPM [Max] | 385 rpm |
| Material | Cast Iron |
| Output Torque at Rated PSI (inch/pounds) | 1956 in lb |
| Special Features | None |
| Maximum Speed @ Continuous Flow | 385 rpm @ 15 gal/min |
| Flange Orientation | Standard |
| Special Features Assembly Code | 0 |
| Pressure [Max] | 1700 psi |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Output Shaft Code | 24 |
| Port Type | BSPP |
| Mounting Hole Size | 0.565 in |
| Mounting Type Code | A |
| Port Location | Side Port |
| Shaft Type | Straight |
| Weight | 13.0 LB |
