Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 3.54 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| RPM [Max] | 953 rpm |
| Mounting Type Code | A |
| Port Location | Side Port |
| Mounting Holes | 0.535 in |
| Shaft Type | Straight |
| Special Features | Free Running Gerotor |
| Shaft Size & Type | Straight |
| RPM [Min] | 953 rpm |
| Port Type | BSPP |
| Motor Element | Gerotor |
| Series | H Series |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.187 in |
| Output Torque at Rated PSI (inch/pounds) | 805 in lb |
| Pressure [Max] | 1800 psi |
| Corrosion Resistant | No |
| Flow Rate | 14 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Displacement (in³/rev) | 3.54 |
| Geroter/Geroler Options | Free Running |
| Special Features Hardware Code | AA |
| Mount Type | 2 Bolt |
| Output Shaft Code | 24 |
| Splines | 0 |
| Duty | Standard-Duty |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Flow [Max] | 15 gal/min |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Paint Code | A |
| Port Size | 1/2, G 1/2 |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Case Drain Code | 2 |
| Mounting Hole Size | 0.565 in |
| Seal Material | Buna-N |
| Flange Orientation | Standard |
| Port Code | E |
| Weight | 13.0 LB |
