Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 3.54 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Flow Rate | 14 gal/min |
| Port Size | 1/2, G 1/2 |
| Port Code | E |
| Special Features | Free Running Gerotor |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Location | Side Port |
| Displacement (in³/rev) | 3.54 |
| Rotation | Standard Rotation |
| Paint Code | A |
| Shaft Size & Type | Straight |
| Geroter/Geroler Options | Free Running |
| RPM [Min] | 953 rpm |
| Mounting Type Code | A |
| Port Type | BSPP |
| Special Features Hardware Code | AA |
| Mounting Hole Size | 0.565 in |
| Mounting Holes | 0.535 in |
| Splines | 0 |
| Material | Cast Iron |
| Mount Type | 2 Bolt |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Series | H Series |
| Shaft Type | Straight |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 805 in lb |
| Duty | Standard-Duty |
| Flow [Max] | 15 gal/min |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Motor Type | Spool Valve |
| RPM [Max] | 953 rpm |
| Case Drain Code | 2 |
| Motor Element | Gerotor |
| Output Shaft Code | 24 |
| Seal Material | Buna-N |
| Bolt Circle Dia. | 4.187 in |
| Pressure [Max] | 1800 psi |
| Pilot Diameter | 3.25 in |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Special Features Assembly Code | 0 |
| Weight | 13.0 LB |
