Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Series | H Series |
| Port Location | Side Port |
| RPM [Min] | 1021 rpm |
| Geroter/Geroler Options | Free Running |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Shaft Size & Type | Straight |
| Paint Code | A |
| Special Features | Free Running Gerotor |
| Port Size | 1/2, G 1/2 |
| Mounting Type Code | A |
| Flange Orientation | Standard |
| Corrosion Resistant | No |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 2.2 |
| RPM [Max] | 1021 rpm |
| Shaft Type | Straight |
| Mount Type | 2 Bolt |
| Seal Material | Buna-N |
| Flow [Max] | 10 gal/min |
| Flow Rate | 10 gal/min |
| Splines | 0 |
| Mounting Hole Size | 0.535 in |
| Pilot Diameter | 3.25 in |
| Mounting Holes | 0.535 in |
| Bolt Circle Dia. | 4.19 in |
| Output Shaft Code | 24 |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Inlet Pressure [Max] | 2500 psi |
| Port Type | BSPP |
| Rotation | Standard Rotation |
| Special Features Hardware Code | AA |
| Case Drain Code | 2 |
| Material | Cast Iron |
| Pressure [Max] | 1800 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Motor Element | Gerotor |
| Port Code | E |
| Weight | 13.0 LB |
