Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Series | H Series |
| Material | Cast Iron |
| Geroter/Geroler Options | Free Running |
| Flange Orientation | Standard |
| Case Drain Code | 2 |
| Corrosion Resistant | No |
| Pressure [Max] | 1800 psi |
| RPM [Max] | 1021 rpm |
| Pilot Diameter | 3.25 in |
| Mount Type | 2 Bolt |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| RPM [Min] | 1021 rpm |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 2.2 |
| Mounting Type Code | A |
| Port Location | Side Port |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Special Features Assembly Code | 0 |
| Special Features | Free Running Gerotor |
| Port Size | 1/2, G 1/2 |
| Mounting Holes | 0.535 in |
| Port Type | BSPP |
| Duty | Standard-Duty |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Shaft Code | 24 |
| Shaft Type | Straight |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Paint Code | A |
| Shaft Size & Type | Straight |
| Flow Rate | 10 gal/min |
| Bolt Circle Dia. | 4.19 in |
| Mounting Hole Size | 0.535 in |
| Port Code | E |
| Special Features Hardware Code | AA |
| Flow [Max] | 10 gal/min |
| Weight | 13.0 LB |
