Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Holes | 0.535 in |
| Mount Type | 2 Bolt |
| Port Type | Manifold |
| Rotation | Standard Rotation |
| RPM [Min] | 1021 rpm |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 2.2 |
| RPM [Max] | 1021 rpm |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| Pilot Diameter | 3.25 in |
| Port Location | Side Port |
| Port Size | Manifold, M8 x 1.25 Threads |
| Paint Code | A |
| Bolt Circle Dia. | 4.187 in |
| Shaft Type | Straight |
| Duty | Standard-Duty |
| Mounting Type Code | A |
| Case Drain Code | 2 |
| Output Torque at Rated PSI (inch/pounds) | 497 in lb |
| Splines | 0 |
| Flow [Max] | 10 gal/min |
| Mounting Hole Size | 0.565 in |
| Material | Cast Iron |
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Special Features Assembly Code | 0 |
| Series | H Series |
| Pressure [Max] | 1800 psi |
| Case Drain | G 1/4 (BSP) |
| Output Shaft Code | 24 |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Hardware Code | AA |
| Special Features | Free Running Gerotor |
| Seal Material | Buna-N |
| Port Code | D |
| Shaft Size & Type | Straight |
| Flow Rate | 38 lpm |
| Weight | 13.0 LB |
