Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| RPM [Max] | 1021 rpm |
| Mounting Type Code | A |
| Displacement (in³/rev) | 2.2 |
| Series | H Series |
| Output Torque at Rated PSI (inch/pounds) | 497 in lb |
| Special Features Assembly Code | 0 |
| Shaft Type | Straight |
| Shaft Size & Type | Straight |
| Special Features | Free Running Gerotor |
| Mount Type | 2 Bolt |
| Motor Type | Spool Valve |
| Paint Code | A |
| Port Location | Side Port |
| Case Drain | G 1/4 (BSP) |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Hardware Code | AA |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Duty | Standard-Duty |
| Case Drain Code | 2 |
| Material | Cast Iron |
| Pilot Diameter | 3.25 in |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 4.187 in |
| Output Shaft Code | 24 |
| Port Code | D |
| Rotation | Standard Rotation |
| Corrosion Resistant | No |
| RPM [Min] | 1021 rpm |
| Mounting Hole Size | 0.565 in |
| Pressure [Max] | 1800 psi |
| Seal Material | Buna-N |
| Splines | 0 |
| Port Size | Manifold, M8 x 1.25 Threads |
| Port Type | Manifold |
| Motor Element | Gerotor |
| Flow [Max] | 10 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Holes | 0.535 in |
| Flow Rate | 38 lpm |
| Weight | 13.0 LB |
