Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Shaft Type | Splined |
| RPM [Max] | 1021 rpm |
| RPM [Min] | 1021 rpm |
| Case Drain Code | 0 |
| Pilot Diameter | 3.25 in |
| Pressure [Max] | 1800 psi |
| Corrosion Resistant | No |
| Shaft Size & Type | 1 in - 6T Spline |
| Special Features Hardware Code | AA |
| Rotation | Standard Rotation |
| Mounting Holes | 0.535 in |
| Bolt Circle Dia. | 4.187 in |
| Splines | 6 |
| Port Location | Side Port |
| Mounting Type Code | A |
| Special Features | Free Running Gerotor |
| Material | Cast Iron |
| Displacement (in³/rev) | 2.2 |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Case Drain | None |
| Port Code | C |
| Series | H Series |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Hole Size | 0.565 in |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Seal Material | Buna-N |
| Flange Orientation | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Flow [Max] | 10 gal/min |
| Port Type | Manifold |
| Special Features Assembly Code | 0 |
| Motor Element | Gerotor |
| Output Shaft Code | 02 |
| Mount Type | 2 Bolt |
| Motor Type | Spool Valve |
| Paint Code | A |
| Duty | Standard-Duty |
| Flow Rate | 9.5 gal/min |
| Geroter/Geroler Options | Free Running |
| Weight | 11.2 LB |
