Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Location | Side Port |
| Case Drain Code | 0 |
| Motor Type | Spool Valve |
| Port Code | C |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Rotation | Standard Rotation |
| Paint Code | A |
| Output Shaft Code | 02 |
| Port Type | Manifold |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Series | H Series |
| Motor Element | Gerotor |
| RPM [Max] | 1021 rpm |
| Displacement (in³/rev) | 2.2 |
| Flow Rate | 9.5 gal/min |
| Special Features Assembly Code | 0 |
| Bolt Circle Dia. | 4.187 in |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Pilot Diameter | 3.25 in |
| RPM [Min] | 1021 rpm |
| Shaft Size & Type | 1 in - 6T Spline |
| Mounting Hole Size | 0.565 in |
| Splines | 6 |
| Special Features Hardware Code | AA |
| Mount Type | 2 Bolt |
| Inlet Pressure [Max] | 2500 psi |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Case Drain | None |
| Pressure [Max] | 1800 psi |
| Special Features | Free Running Gerotor |
| Geroter/Geroler Options | Free Running |
| Material | Cast Iron |
| Mounting Type Code | A |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Mounting Holes | 0.535 in |
| Corrosion Resistant | No |
| Shaft Type | Splined |
| Flow [Max] | 10 gal/min |
| Weight | 11.2 LB |
