Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Type | NPTF |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Shaft Type | Splined |
| Port Size | 1/2, 1/2-14 |
| Rotation | Standard Rotation |
| Mount Type | 2 Bolt |
| Bolt Circle Dia. | 4.187 in |
| Mounting Hole Size | 0.565 in |
| Splines | 6 |
| Corrosion Resistant | No |
| Pressure [Max] | 1800 psi |
| Seal Material | Buna-N |
| Duty | Standard-Duty |
| Series | H Series |
| Displacement (in³/rev) | 2.2 |
| Paint Code | A |
| RPM [Min] | 1021 rpm |
| RPM [Max] | 1021 rpm |
| Material | Cast Iron |
| Port Code | B |
| Mounting Type Code | A |
| Flow [Max] | 10 gal/min |
| Flange Orientation | Standard |
| Output Shaft Code | 02 |
| Special Features Hardware Code | AA |
| Port Size & Location | 1/2 in NPTF Side |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Pilot Diameter | 3.25 in |
| Geroter/Geroler Options | Free Running |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Flow Rate | 9.5 gal/min |
| Motor Element | Gerotor |
| Mounting Holes | 0.535 in |
| Case Drain | None |
| Special Features | Free Running Gerotor |
| Case Drain Code | 0 |
| Shaft Size & Type | 1 in - 6T Spline |
| Weight | 11.2 LB |
