Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Flow Rate | 9.5 gal/min |
| Special Features Hardware Code | AA |
| Rotation | Standard Rotation |
| Output Shaft Code | 02 |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Mounting Type Code | A |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Code | B |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Holes | 0.535 in |
| Case Drain Code | 0 |
| Port Size | 1/2, 1/2-14 |
| Pressure [Max] | 1800 psi |
| Special Features Assembly Code | 0 |
| Port Type | NPTF |
| Special Features | Free Running Gerotor |
| Seal Material | Buna-N |
| Case Drain | None |
| Paint Code | A |
| Series | H Series |
| Port Location | Side Port |
| Geroter/Geroler Options | Free Running |
| Mounting Hole Size | 0.565 in |
| Splines | 6 |
| Mount Type | 2 Bolt |
| Displacement (in³/rev) | 2.2 |
| Flange Orientation | Standard |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Duty | Standard-Duty |
| Material | Cast Iron |
| Shaft Type | Splined |
| Bolt Circle Dia. | 4.187 in |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Motor Type | Spool Valve |
| Pilot Diameter | 3.25 in |
| RPM [Min] | 1021 rpm |
| Motor Element | Gerotor |
| Flow [Max] | 10 gal/min |
| RPM [Max] | 1021 rpm |
| Port Size & Location | 1/2 in NPTF Side |
| Corrosion Resistant | No |
| Weight | 11.2 LB |
