Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 3.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Location | Side Port |
| Port Type | SAE O-Ring |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Type | Splined |
| Port Size & Location | SAE-10 Side |
| Output Shaft Code | 02 |
| Case Drain | None |
| Flange Orientation | Standard |
| Shaft Size & Type | 1 in - 6T Spline |
| Pressure [Max] | 1800 psi |
| Special Features Assembly Code | 0 |
| Port Code | A |
| Motor Element | Gerotor |
| Port Size | SAE-10, 7/8-14 UNF |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Mounting Hole Size | 0.535 in |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 15 gal/min |
| Series | H Series |
| Bolt Circle Dia. | 4.19 in |
| Output Torque at Rated PSI (inch/pounds) | 805.42 in lb |
| Mounting Type Code | A |
| Geroter/Geroler Options | Free Running |
| Pilot Diameter | 3.25 in |
| Mount Type | 2 Bolt |
| Case Drain Code | 0 |
| Seal Material | Buna-N |
| Special Features | Free Running Gerotor |
| RPM [Min] | 953 rpm |
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Duty | Standard-Duty |
| Special Features Hardware Code | AA |
| RPM [Max] | 953 rpm |
| Material | Cast Iron |
| Mounting Holes | 0.535 in |
| Splines | 6 |
| Paint Code | A |
| Displacement (in³/rev) | 3.5 |
| Corrosion Resistant | No |
| Weight | 11.5 LB |
