Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 3.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Splines | 6 |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Port Type | SAE O-Ring |
| Mount Type | 2 Bolt |
| Pressure [Max] | 1800 psi |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Min] | 953 rpm |
| RPM [Max] | 953 rpm |
| Flow [Max] | 15 gal/min |
| Special Features | Free Running Gerotor |
| Paint Code | A |
| Port Size & Location | SAE-10 Side |
| Material | Cast Iron |
| Mounting Type Code | A |
| Port Code | A |
| Port Location | Side Port |
| Shaft Size & Type | 1 in - 6T Spline |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Holes | 0.535 in |
| Displacement (in³/rev) | 3.5 |
| Flow Rate | 15 gal/min |
| Case Drain Code | 0 |
| Special Features Assembly Code | 0 |
| Pilot Diameter | 3.25 in |
| Shaft Type | Splined |
| Motor Type | Spool Valve |
| Output Torque at Rated PSI (inch/pounds) | 805.42 in lb |
| Series | H Series |
| Geroter/Geroler Options | Free Running |
| Flange Orientation | Standard |
| Case Drain | None |
| Duty | Standard-Duty |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Port Size | SAE-10, 7/8-14 UNF |
| Rotation | Standard Rotation |
| Motor Element | Gerotor |
| Bolt Circle Dia. | 4.19 in |
| Mounting Hole Size | 0.535 in |
| Output Shaft Code | 02 |
| Special Features Hardware Code | AA |
| Weight | 11.5 LB |
