Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| RPM [Min] | 1021 rpm |
| Bolt Circle Dia. | 4.19 in |
| Port Code | A |
| Pilot Diameter | 3.25 in |
| Shaft Type | Splined |
| Inlet Pressure [Max] | 2500 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Shaft Code | 02 |
| Port Location | Side Port |
| Flow [Max] | 10 gal/min |
| Splines | 6 |
| Motor Element | Gerotor |
| Special Features Assembly Code | 0 |
| Series | H Series |
| Mounting Hole Size | 0.535 in |
| Pressure [Max] | 1800 psi |
| Shaft Size & Type | 1 in - 6T Spline |
| Motor Type | Spool Valve |
| Seal Material | Buna-N |
| Mounting Type Code | A |
| Geroter/Geroler Options | Free Running |
| Case Drain Code | 0 |
| Rotation | Standard Rotation |
| Duty | Standard-Duty |
| Displacement (in³/rev) | 2.2 |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Flow Rate | 10 gal/min |
| Flange Orientation | Standard |
| Special Features Hardware Code | AA |
| Mount Type | 2 Bolt |
| RPM [Max] | 1021 rpm |
| Port Size | SAE-10, 7/8-14 UNF |
| Special Features | Free Running Gerotor |
| Mounting Holes | 0.535 in |
| Port Size & Location | SAE-10 Side |
| Corrosion Resistant | No |
| Material | Cast Iron |
| Port Type | SAE O-Ring |
| Paint Code | A |
| Case Drain | None |
| Weight | 11.2 LB |
