Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Duty | Standard-Duty |
| Mounting Type Code | A |
| Bolt Circle Dia. | 4.19 in |
| Output Shaft Code | 02 |
| Series | H Series |
| Geroter/Geroler Options | Free Running |
| Pressure [Max] | 1800 psi |
| Special Features Assembly Code | 0 |
| Splines | 6 |
| Shaft Type | Splined |
| Paint Code | A |
| Rotation | Standard Rotation |
| Corrosion Resistant | No |
| Mount Type | 2 Bolt |
| Flange Orientation | Standard |
| Shaft Size & Type | 1 in - 6T Spline |
| Flow [Max] | 10 gal/min |
| Mounting Holes | 0.535 in |
| Material | Cast Iron |
| Port Location | Side Port |
| Flow Rate | 10 gal/min |
| Motor Type | Spool Valve |
| RPM [Max] | 1021 rpm |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Port Code | A |
| Special Features | Free Running Gerotor |
| Special Features Hardware Code | AA |
| Port Size | SAE-10, 7/8-14 UNF |
| Pilot Diameter | 3.25 in |
| Port Type | SAE O-Ring |
| Case Drain | None |
| Port Size & Location | SAE-10 Side |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Min] | 1021 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 0.535 in |
| Displacement (in³/rev) | 2.2 |
| Case Drain Code | 0 |
| Weight | 11.2 LB |
