Find a Service Center
- H Series Hydraulic Motor
- 15 gal/min
- 8.9 in3
- Shaft: 1 in Straight w/Woodruff Key
- 1/2 Side Port
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Series | H Series |
| Mount Type | 2 Bolt, SAE-A |
| RPM [Max] | 385 rpm |
| Flange Orientation | Standard |
| Special Features Hardware Code | 00 |
| Port Size | 1/2 |
| Port Type | BSPP |
| Shaft Type | Straight w/ Woodruff Key |
| Inlet Pressure [Max] | 2500 psi |
| Port Location | Side Port |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Splines | 0 |
| Paint Code | A |
| Mounting Type Code | A |
| Displacement (in³/rev) | 8.9 |
| Case Drain Code | 2 |
| Maximum Speed @ Continuous Flow | 385 rpm @ 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 1954 in lb |
| Motor Element | Gerotor |
| Port Code | E |
| Corrosion Resistant | No |
| Pilot Diameter | 3.25 in |
| Special Features | None |
| Rotation | Standard Rotation |
| Mounting Holes | 0.535 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flow [Max] | 15 gal/min |
| Motor Type | Spool Valve |
| Pressure [Max] | 1700 psi |
| Output Shaft Code | 01 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Case Drain | G 1/4 (BSP) |
| Special Features Assembly Code | 0 |
| Bolt Circle Dia. | 4.18 in |
| Weight | 13.0 LB |
