Find a Service Center
- H Series Hydraulic Motor
- 15 gal/min
- 8.9 in3
- Shaft: 1 in Straight w/Woodruff Key
- 1/2 Side Port
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Shaft Type | Straight w/ Woodruff Key |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.18 in |
| Port Size | 1/2 |
| Mount Type | 2 Bolt, SAE-A |
| Flange Orientation | Standard |
| Pressure [Max] | 1700 psi |
| Port Code | E |
| RPM [Max] | 385 rpm |
| Special Features Assembly Code | 0 |
| Case Drain | G 1/4 (BSP) |
| Pilot Diameter | 3.25 in |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Port Location | Side Port |
| Flow [Max] | 15 gal/min |
| Case Drain Code | 2 |
| Special Features | None |
| Mounting Type Code | A |
| Special Features Hardware Code | 00 |
| Mounting Holes | 0.535 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Seal Material | Buna-N |
| Paint Code | A |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Port Type | BSPP |
| Displacement (in³/rev) | 8.9 |
| Output Shaft Code | 01 |
| Maximum Speed @ Continuous Flow | 385 rpm @ 15 gal/min |
| Series | H Series |
| Output Torque at Rated PSI (inch/pounds) | 1954 in lb |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Splines | 0 |
| Weight | 13.0 LB |
