Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Splines | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Case Drain | G 1/4 (BSP) |
| Displacement (in³/rev) | 2.2 |
| Pilot Diameter | 3.25 in |
| Flange Orientation | Standard |
| Paint Code | A |
| Special Features Hardware Code | AA |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 497 in lb |
| Inlet Pressure [Max] | 2500 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Motor Element | Gerotor |
| Duty | Standard-Duty |
| Special Features | Free Running Gerotor |
| Case Drain Code | 2 |
| Corrosion Resistant | No |
| Shaft Type | Straight w/ Woodruff Key |
| Flow [Max] | 10 gal/min |
| Seal Material | Buna-N |
| Bolt Circle Dia. | 4.187 in |
| Series | H Series |
| Motor Type | Spool Valve |
| Mounting Hole Size | 0.565 in |
| Mounting Type Code | A |
| Port Code | E |
| RPM [Max] | 1021 rpm |
| Port Type | BSPP |
| Port Location | Side Port |
| Output Shaft Code | 01 |
| Port Size | 1/2 |
| Rotation | Standard Rotation |
| Special Features Assembly Code | 0 |
| Mounting Holes | 0.535 in |
| Pressure [Max] | 1800 psi |
| Mount Type | 2 Bolt |
| Weight | 13.0 LB |
