Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Displacement (in³/rev) | 2.2 |
| Flow [Max] | 10 gal/min |
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Max] | 1021 rpm |
| Seal Material | Buna-N |
| Port Location | Side Port |
| Port Size | 1/2 |
| Series | H Series |
| Paint Code | A |
| Output Torque at Rated PSI (inch/pounds) | 497 in lb |
| Rotation | Standard Rotation |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| Mounting Type Code | A |
| Special Features Assembly Code | 0 |
| Pressure [Max] | 1800 psi |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Output Shaft Code | 01 |
| Mounting Holes | 0.535 in |
| Pilot Diameter | 3.25 in |
| Flange Orientation | Standard |
| Case Drain | G 1/4 (BSP) |
| Bolt Circle Dia. | 4.187 in |
| Shaft Type | Straight w/ Woodruff Key |
| Port Type | BSPP |
| Case Drain Code | 2 |
| Inlet Pressure [Max] | 2500 psi |
| Mount Type | 2 Bolt |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Hole Size | 0.565 in |
| Splines | 0 |
| Port Code | E |
| Special Features | Free Running Gerotor |
| Corrosion Resistant | No |
| Special Features Hardware Code | AA |
| Weight | 13.0 LB |
