Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 3.54 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Corrosion Resistant | No |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Material | Cast Iron |
| Output Torque at Rated PSI (inch/pounds) | 805 in lb |
| Output Shaft Code | 01 |
| Splines | 0 |
| Port Type | Manifold |
| Mounting Hole Size | 0.565 in |
| Flow [Max] | 15 gal/min |
| Mounting Type Code | A |
| Paint Code | A |
| Displacement (in³/rev) | 3.54 |
| Bolt Circle Dia. | 4.187 in |
| Inlet Pressure [Max] | 2500 psi |
| Seal Material | Buna-N |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 0 |
| Pilot Diameter | 3.25 in |
| RPM [Min] | 953 rpm |
| Mounting Holes | 0.535 in |
| Duty | Standard-Duty |
| Port Location | Side Port |
| Mount Type | 2 Bolt |
| Rotation | Standard Rotation |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Shaft Type | Straight w/ Woodruff Key |
| Flange Orientation | Standard |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Series | H Series |
| Geroter/Geroler Options | Free Running |
| Flow Rate | 14 gal/min |
| Special Features | Free Running Gerotor |
| RPM [Max] | 953 rpm |
| Case Drain | None |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Element | Gerotor |
| Port Code | C |
| Special Features Hardware Code | AA |
| Weight | 11.5 LB |
