Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 3.54 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Flow Rate | 14 gal/min |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Flange Orientation | Standard |
| Special Features Assembly Code | 0 |
| Special Features Hardware Code | AA |
| Corrosion Resistant | No |
| Pilot Diameter | 3.25 in |
| Material | Cast Iron |
| Splines | 0 |
| Bolt Circle Dia. | 4.187 in |
| Series | H Series |
| Flow [Max] | 15 gal/min |
| RPM [Min] | 953 rpm |
| Port Type | Manifold |
| Displacement (in³/rev) | 3.54 |
| Case Drain Code | 0 |
| Pressure [Max] | 1800 psi |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Output Shaft Code | 01 |
| Mounting Holes | 0.535 in |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Mount Type | 2 Bolt |
| Special Features | Free Running Gerotor |
| Geroter/Geroler Options | Free Running |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Type Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Output Torque at Rated PSI (inch/pounds) | 805 in lb |
| Mounting Hole Size | 0.565 in |
| RPM [Max] | 953 rpm |
| Rotation | Standard Rotation |
| Port Code | C |
| Port Location | Side Port |
| Paint Code | A |
| Case Drain | None |
| Motor Type | Spool Valve |
| Seal Material | Buna-N |
| Weight | 11.5 LB |
