Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features | Free Running Gerotor |
| Flange Orientation | Standard |
| Mounting Holes | 0.535 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Type | Spool Valve |
| Pilot Diameter | 3.25 in |
| Motor Element | Gerotor |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Splines | 0 |
| Corrosion Resistant | No |
| Paint Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Mounting Type Code | A |
| Case Drain Code | 0 |
| Port Type | Manifold |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Assembly Code | 0 |
| Port Code | C |
| Displacement (in³/rev) | 2.2 |
| Shaft Type | Straight w/ Woodruff Key |
| Flow Rate | 10 gal/min |
| Case Drain | None |
| Output Shaft Code | 01 |
| Series | H Series |
| Duty | Standard-Duty |
| Material | Cast Iron |
| Mounting Hole Size | 0.535 in |
| Mount Type | 2 Bolt |
| Flow [Max] | 10 gal/min |
| Special Features Hardware Code | AA |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Pressure [Max] | 1800 psi |
| Rotation | Standard Rotation |
| RPM [Max] | 1021 rpm |
| Geroter/Geroler Options | Free Running |
| RPM [Min] | 1021 rpm |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Bolt Circle Dia. | 4.19 in |
| Weight | 13.0 LB |
