Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Motor Type | Spool Valve |
| Special Features Hardware Code | AA |
| Duty | Standard-Duty |
| Pilot Diameter | 3.25 in |
| Special Features | Free Running Gerotor |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Mount Type | 2 Bolt |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Bolt Circle Dia. | 4.19 in |
| Corrosion Resistant | No |
| RPM [Min] | 1021 rpm |
| Mounting Holes | 0.535 in |
| Port Type | Manifold |
| Rotation | Standard Rotation |
| Flow Rate | 10 gal/min |
| Case Drain Code | 0 |
| Geroter/Geroler Options | Free Running |
| Case Drain | None |
| Motor Element | Gerotor |
| Mounting Hole Size | 0.535 in |
| Port Location | Side Port |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Paint Code | A |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Shaft Type | Straight w/ Woodruff Key |
| Displacement (in³/rev) | 2.2 |
| Seal Material | Buna-N |
| Splines | 0 |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Material | Cast Iron |
| Port Code | C |
| RPM [Max] | 1021 rpm |
| Series | H Series |
| Flange Orientation | Standard |
| Flow [Max] | 10 gal/min |
| Pressure [Max] | 1800 psi |
| Output Shaft Code | 01 |
| Mounting Type Code | A |
| Special Features Assembly Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Weight | 13.0 LB |
