
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
Inlet Pressure [Max] | 2500 psi |
Pressure [Max] | 1650 psi |
Pilot Diameter | 3.25 in |
Special Features Hardware Code | 00 |
Paint Code | A |
Motor Element | Gerotor |
Material | Cast Iron |
RPM [Max] | 353 rpm |
Mounting Hole Size | 0.535 in |
Shaft Type | Straight w/ Woodruff Key |
Series | H Series |
Port Size | SAE-10, 7/8-14 UNF |
Port Location | Side Port |
Special Features Assembly Code | 0 |
Corrosion Resistant | No |
Mount Type | 2 Bolt |
Splines | 0 |
Paint/Packaging | Low Gloss Black, Individual Box |
RPM [Min] | 353 rpm |
Flow Rate | 15 gal/min |
Case Drain Code | 1 |
Seal Material | Buna-N |
Port Code | A |
Shaft Size & Type | 1 in x 1/4 in Straight |
Displacement (in³/rev) | 9.7 |
Bolt Circle Dia. | 4.19 in |
Output Shaft Code | 01 |
Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
Port Size & Location | SAE-10 Side |
Flange Orientation | Standard |
Special Features | None |
Motor Type | Spool Valve |
Mounting Type Code | A |
Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
Rotation | Standard Rotation |
Flow [Max] | 15 gal/min |
Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
Duty | Standard-Duty |
Port Type | SAE O-Ring |
Mounting Holes | 0.535 in |
Weight | 13.0 LB |
