Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Port Location | Side Port |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 3.25 in |
| Special Features Hardware Code | 00 |
| Special Features Assembly Code | 0 |
| Port Code | B |
| Port Size | 1/2, 1/2-14 |
| Motor Element | Gerotor |
| Output Shaft Code | 01 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Corrosion Resistant | No |
| Motor Type | Spool Valve |
| Series | H Series |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Mount Type | 2 Bolt |
| Mounting Type Code | A |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Flow [Max] | 15 gal/min |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Bolt Circle Dia. | 4.187 in |
| Mounting Hole Size | 0.565 in |
| Splines | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Flow Rate | 14 gal/min |
| Flange Orientation | Standard |
| Seal Material | Buna-N |
| Special Features | None |
| Port Size & Location | 1/2 in NPTF Side |
| Mounting Holes | 0.535 in |
| Material | Cast Iron |
| RPM [Min] | 152 rpm |
| Duty | Standard-Duty |
| Pressure [Max] | 1250 psi |
| Case Drain Code | 1 |
| Paint Code | A |
| Port Type | NPTF |
| RPM [Max] | 152 rpm |
| Displacement (in³/rev) | 22.58 |
| Weight | 13.0 LB |
