Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Motor Element | Gerotor |
| Displacement (in³/rev) | 22.58 |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Output Shaft Code | 01 |
| Duty | Standard-Duty |
| RPM [Min] | 152 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Flange Orientation | Standard |
| Motor Type | Spool Valve |
| Mount Type | 2 Bolt |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Seal Material | Buna-N |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Series | H Series |
| Bolt Circle Dia. | 4.187 in |
| Port Type | NPTF |
| Paint Code | A |
| Mounting Hole Size | 0.565 in |
| Flow Rate | 14 gal/min |
| Port Code | B |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Pilot Diameter | 3.25 in |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Location | Side Port |
| Port Size | 1/2, 1/2-14 |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Splines | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| RPM [Max] | 152 rpm |
| Special Features Assembly Code | 0 |
| Pressure [Max] | 1250 psi |
| Material | Cast Iron |
| Rotation | Standard Rotation |
| Case Drain Code | 1 |
| Port Size & Location | 1/2 in NPTF Side |
| Weight | 13.0 LB |
