Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 5.86 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Hole Size | 0.565 in |
| Series | H Series |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Paint Code | A |
| Duty | Standard-Duty |
| Case Drain | None |
| Material | Cast Iron |
| RPM [Max] | 585 rpm |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 5.86 |
| Flow [Max] | 15 gal/min |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Output Shaft Code | 01 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Pressure [Max] | 1800 psi |
| Special Features Hardware Code | AA |
| Special Features | Free Running Gerotor |
| Pilot Diameter | 3.25 in |
| Mounting Type Code | A |
| Mount Type | 2 Bolt |
| Flange Orientation | Standard |
| Splines | 0 |
| Port Code | A |
| Special Features Assembly Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 1372 in lb |
| Shaft Type | Straight w/ Woodruff Key |
| Geroter/Geroler Options | Free Running |
| Port Size & Location | SAE-10 Side |
| Motor Element | Gerotor |
| Corrosion Resistant | No |
| Port Location | Side Port |
| RPM [Min] | 585 rpm |
| Mounting Holes | 0.535 in |
| Flow Rate | 14 gal/min |
| Bolt Circle Dia. | 4.187 in |
| Case Drain Code | 0 |
| Port Type | SAE O-Ring |
| Seal Material | Buna-N |
| Weight | 13.0 LB |
