Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 5.86 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Flow [Max] | 15 gal/min |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Paint Code | A |
| Special Features Hardware Code | AA |
| RPM [Min] | 585 rpm |
| Port Type | SAE O-Ring |
| RPM [Max] | 585 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Hole Size | 0.565 in |
| Pilot Diameter | 3.25 in |
| Mount Type | 2 Bolt |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 1372 in lb |
| Displacement (in³/rev) | 5.86 |
| Series | H Series |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1800 psi |
| Flow Rate | 14 gal/min |
| Case Drain | None |
| Splines | 0 |
| Motor Type | Spool Valve |
| Material | Cast Iron |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Output Shaft Code | 01 |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Motor Element | Gerotor |
| Bolt Circle Dia. | 4.187 in |
| Mounting Type Code | A |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Case Drain Code | 0 |
| Port Size & Location | SAE-10 Side |
| Geroter/Geroler Options | Free Running |
| Corrosion Resistant | No |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Special Features | Free Running Gerotor |
| Mounting Holes | 0.535 in |
| Port Location | Side Port |
| Port Code | A |
| Weight | 13.0 LB |
