Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Rotation | Standard Rotation |
| Port Size | SAE-10, 7/8-14 UNF |
| Material | Cast Iron |
| RPM [Min] | 152 rpm |
| Port Code | A |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Splines | 0 |
| Seal Material | Buna-N |
| Series | H Series |
| Duty | Standard-Duty |
| Output Shaft Code | 01 |
| Displacement (in³/rev) | 22.6 |
| Motor Element | Gerotor |
| Paint Code | A |
| Mounting Hole Size | 0.535 in |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Bolt Circle Dia. | 4.19 in |
| Port Type | SAE O-Ring |
| Pilot Diameter | 3.25 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Pressure [Max] | 1250 psi |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Mounting Type Code | A |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Max] | 152 rpm |
| Flow Rate | 15 gal/min |
| Special Features Hardware Code | 00 |
| Port Size & Location | SAE-10 Side |
| Case Drain Code | 1 |
| Mount Type | 2 Bolt |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Mounting Holes | 0.535 in |
| Weight | 13.0 LB |
