Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Type | SAE O-Ring |
| Mounting Holes | 0.535 in |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features Hardware Code | 00 |
| Port Location | Side Port |
| Corrosion Resistant | No |
| Special Features Assembly Code | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Motor Type | Spool Valve |
| Pressure [Max] | 1250 psi |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Rotation | Standard Rotation |
| RPM [Max] | 152 rpm |
| Flow Rate | 15 gal/min |
| Flow [Max] | 15 gal/min |
| Mounting Hole Size | 0.535 in |
| Duty | Standard-Duty |
| Inlet Pressure [Max] | 2500 psi |
| Seal Material | Buna-N |
| Bolt Circle Dia. | 4.19 in |
| RPM [Min] | 152 rpm |
| Mounting Type Code | A |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Port Size & Location | SAE-10 Side |
| Case Drain Code | 1 |
| Output Shaft Code | 01 |
| Series | H Series |
| Material | Cast Iron |
| Splines | 0 |
| Pilot Diameter | 3.25 in |
| Paint Code | A |
| Mount Type | 2 Bolt |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Size | SAE-10, 7/8-14 UNF |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 22.6 |
| Flange Orientation | Standard |
| Port Code | A |
| Special Features | None |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Weight | 13.0 LB |
