Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Rotation | Standard Rotation |
| Case Drain | None |
| Duty | Standard-Duty |
| Special Features | None |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Max] | 969 rpm |
| Case Drain Code | 0 |
| RPM [Min] | 969 rpm |
| Output Shaft Code | 01 |
| Mount Type | 2 Bolt |
| Motor Element | Gerotor |
| Special Features Assembly Code | 0 |
| Mounting Type Code | A |
| Series | H Series |
| Flow [Max] | 12 gal/min |
| Port Type | SAE O-Ring |
| Pilot Diameter | 3.25 in |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Mounting Holes | 0.535 in |
| Seal Material | Buna-N |
| Corrosion Resistant | No |
| Displacement (in³/rev) | 2.8 |
| Material | Cast Iron |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Bolt Circle Dia. | 4.19 in |
| Flow Rate | 12 gal/min |
| Port Code | G |
| Flange Orientation | Standard |
| Shaft Type | Straight w/ Woodruff Key |
| Paint Code | A |
| Port Location | End Port |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size | SAE-8, 7/8-14 UNF |
| Motor Type | Spool Valve |
| Mounting Hole Size | 0.535 in |
| Pressure [Max] | 1800 psi |
| Splines | 0 |
| Weight | 13.0 LB |
