Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Inlet Pressure [Max] | 2500 psi |
| Port Size | SAE-8, 7/8-14 UNF |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Seal Material | Buna-N |
| RPM [Min] | 969 rpm |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Paint Code | A |
| Series | H Series |
| Mounting Type Code | A |
| Splines | 0 |
| Special Features | None |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 0 |
| Special Features Hardware Code | 00 |
| Case Drain | None |
| Motor Element | Gerotor |
| Output Shaft Code | 01 |
| Bolt Circle Dia. | 4.19 in |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Duty | Standard-Duty |
| Corrosion Resistant | No |
| Special Features Assembly Code | 0 |
| Mounting Holes | 0.535 in |
| Flow Rate | 12 gal/min |
| Mounting Hole Size | 0.535 in |
| Port Code | G |
| Material | Cast Iron |
| Shaft Type | Straight w/ Woodruff Key |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 2.8 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Type | SAE O-Ring |
| Port Location | End Port |
| Motor Type | Spool Valve |
| Pilot Diameter | 3.25 in |
| Flange Orientation | Standard |
| Flow [Max] | 12 gal/min |
| RPM [Max] | 969 rpm |
| Mount Type | 2 Bolt |
| Weight | 13.0 LB |
