Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Rotation | Standard Rotation |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Port Type | BSPP |
| Paint Code | A |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Port Location | Side Port |
| RPM [Min] | 152 rpm |
| RPM [Max] | 152 rpm |
| Flow Rate | 14 gal/min |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Inlet Pressure [Max] | 2500 psi |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| Mounting Type Code | A |
| Material | Cast Iron |
| Series | H Series |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Case Drain Code | 2 |
| Seal Material | Buna-N |
| Flow [Max] | 15 gal/min |
| Bolt Circle Dia. | 4.187 in |
| Shaft Type | Straight |
| Displacement (in³/rev) | 22.58 |
| Output Shaft Code | 24 |
| Special Features | None |
| Special Features Assembly Code | 0 |
| Pressure [Max] | 1250 psi |
| Pilot Diameter | 3.25 in |
| Mounting Hole Size | 0.565 in |
| Splines | 0 |
| Shaft Size & Type | Straight |
| Port Size | 1/2, G 1/2 |
| Mounting Holes | 0.535 in |
| Motor Element | Gerotor |
| Mount Type | 2 Bolt |
| Port Code | E |
| Weight | 13.0 LB |
