Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Corrosion Resistant | No |
| Port Type | BSPP |
| Mounting Hole Size | 0.565 in |
| Special Features | None |
| Material | Cast Iron |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Output Shaft Code | 24 |
| Motor Element | Gerotor |
| Pressure [Max] | 1250 psi |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Mounting Type Code | A |
| Port Size | 1/2, G 1/2 |
| Duty | Standard-Duty |
| Displacement (in³/rev) | 22.58 |
| Port Code | E |
| Flow [Max] | 15 gal/min |
| RPM [Min] | 152 rpm |
| Flow Rate | 14 gal/min |
| Bolt Circle Dia. | 4.187 in |
| Series | H Series |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 3.25 in |
| Mount Type | 2 Bolt |
| Shaft Size & Type | Straight |
| Splines | 0 |
| Case Drain Code | 2 |
| Mounting Holes | 0.535 in |
| Shaft Type | Straight |
| Seal Material | Buna-N |
| RPM [Max] | 152 rpm |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Port Location | Side Port |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Flange Orientation | Standard |
| Paint Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Assembly Code | 0 |
| Weight | 13.0 LB |
