Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 17.94 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 17.94 |
| Bolt Circle Dia. | 4.187 in |
| Flow [Max] | 15 gal/min |
| Case Drain Code | 2 |
| Duty | Standard-Duty |
| Port Size | 1/2, G 1/2 |
| Special Features | None |
| Flow Rate | 14 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 3107 in lb |
| Splines | 0 |
| Shaft Size & Type | Straight |
| Mounting Hole Size | 0.565 in |
| Seal Material | Buna-N |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1350 psi |
| Paint Code | A |
| Port Location | Side Port |
| Material | Cast Iron |
| Motor Element | Gerotor |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Motor Type | Spool Valve |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Flange Orientation | Standard |
| Port Code | E |
| Special Features Hardware Code | 00 |
| Series | H Series |
| Corrosion Resistant | No |
| Pilot Diameter | 3.25 in |
| Shaft Type | Straight |
| Output Shaft Code | 24 |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Type | BSPP |
| Mount Type | 2 Bolt |
| Mounting Type Code | A |
| Special Features Assembly Code | 0 |
| RPM [Min] | 192 rpm |
| Mounting Holes | 0.535 in |
| RPM [Max] | 192 rpm |
| Weight | 13.0 LB |
