Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 17.94 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| RPM [Max] | 192 rpm |
| Special Features Assembly Code | 0 |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Bolt Circle Dia. | 4.187 in |
| Port Type | BSPP |
| Motor Element | Gerotor |
| Pilot Diameter | 3.25 in |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Seal Material | Buna-N |
| RPM [Min] | 192 rpm |
| Series | H Series |
| Flange Orientation | Standard |
| Rotation | Standard Rotation |
| Mounting Hole Size | 0.565 in |
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 14 gal/min |
| Port Code | E |
| Duty | Standard-Duty |
| Case Drain Code | 2 |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Pressure [Max] | 1350 psi |
| Mount Type | 2 Bolt |
| Port Size | 1/2, G 1/2 |
| Output Torque at Rated PSI (inch/pounds) | 3107 in lb |
| Special Features | None |
| Output Shaft Code | 24 |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Shaft Size & Type | Straight |
| Displacement (in³/rev) | 17.94 |
| Port Location | Side Port |
| Splines | 0 |
| Flow [Max] | 15 gal/min |
| Shaft Type | Straight |
| Mounting Holes | 0.535 in |
| Paint Code | A |
| Special Features Hardware Code | 00 |
| Mounting Type Code | A |
| Motor Type | Spool Valve |
| Weight | 13.0 LB |
