Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 11.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Output Shaft Code | 24 |
| Port Location | Side Port |
| Pilot Diameter | 3.25 in |
| Duty | Standard-Duty |
| Flow Rate | 15 gal/min |
| Bolt Circle Dia. | 4.19 in |
| Special Features | None |
| Special Features Assembly Code | 0 |
| Port Size | 1/2, G 1/2 |
| Splines | 0 |
| Series | H Series |
| Motor Type | Spool Valve |
| Mounting Type Code | A |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Mounting Hole Size | 0.535 in |
| Motor Element | Gerotor |
| Special Features Hardware Code | 00 |
| Mounting Holes | 0.535 in |
| Shaft Size & Type | Straight |
| Flow [Max] | 15 gal/min |
| Port Type | BSPP |
| Flange Orientation | Standard |
| RPM [Max] | 304 rpm |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mount Type | 2 Bolt |
| Displacement (in³/rev) | 11.3 |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Material | Cast Iron |
| Pressure [Max] | 1600 psi |
| Shaft Type | Straight |
| RPM [Min] | 304 rpm |
| Rotation | Standard Rotation |
| Case Drain Code | 2 |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Paint Code | A |
| Port Code | E |
| Seal Material | Buna-N |
| Weight | 13.0 LB |
