Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 11.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Flange Orientation | Standard |
| Pilot Diameter | 3.25 in |
| Output Shaft Code | 24 |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 2 |
| Motor Element | Gerotor |
| Flow [Max] | 15 gal/min |
| Rotation | Standard Rotation |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Port Type | BSPP |
| Mounting Holes | 0.535 in |
| RPM [Min] | 304 rpm |
| Paint Code | A |
| Port Location | Side Port |
| RPM [Max] | 304 rpm |
| Motor Type | Spool Valve |
| Mount Type | 2 Bolt |
| Bolt Circle Dia. | 4.19 in |
| Pressure [Max] | 1600 psi |
| Displacement (in³/rev) | 11.3 |
| Splines | 0 |
| Special Features Assembly Code | 0 |
| Seal Material | Buna-N |
| Mounting Hole Size | 0.535 in |
| Shaft Size & Type | Straight |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Shaft Type | Straight |
| Mounting Type Code | A |
| Duty | Standard-Duty |
| Port Size | 1/2, G 1/2 |
| Special Features | None |
| Series | H Series |
| Material | Cast Iron |
| Flow Rate | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Code | E |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Weight | 13.0 LB |
