Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features | None |
| Port Size | 1/2, G 1/2 |
| Pressure [Max] | 1650 psi |
| Series | H Series |
| Special Features Hardware Code | 00 |
| Flow Rate | 14 gal/min |
| Bolt Circle Dia. | 4.187 in |
| Motor Element | Gerotor |
| Port Location | Side Port |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Displacement (in³/rev) | 9.7 |
| Splines | 0 |
| Paint Code | A |
| Mounting Type Code | A |
| Flow [Max] | 15 gal/min |
| Pilot Diameter | 3.25 in |
| Output Torque at Rated PSI (inch/pounds) | 2062 in lb |
| Port Type | BSPP |
| Rotation | Standard Rotation |
| RPM [Max] | 353 rpm |
| Material | Cast Iron |
| Shaft Size & Type | Straight |
| Corrosion Resistant | No |
| Output Shaft Code | 24 |
| Duty | Standard-Duty |
| Mounting Hole Size | 0.565 in |
| Special Features Assembly Code | 0 |
| Mount Type | 2 Bolt |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Shaft Type | Straight |
| Port Code | E |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Seal Material | Buna-N |
| Case Drain Code | 2 |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Holes | 0.535 in |
| Weight | 13.0 LB |
