Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Pilot Diameter | 3.25 in |
| Corrosion Resistant | No |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Special Features Assembly Code | 0 |
| Splines | 0 |
| Seal Material | Buna-N |
| Special Features Hardware Code | 00 |
| Output Torque at Rated PSI (inch/pounds) | 2062 in lb |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Shaft Size & Type | Straight |
| Mounting Hole Size | 0.565 in |
| Case Drain Code | 2 |
| Shaft Type | Straight |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Pressure [Max] | 1650 psi |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Material | Cast Iron |
| Mounting Holes | 0.535 in |
| Paint Code | A |
| Port Size | 1/2, G 1/2 |
| Bolt Circle Dia. | 4.187 in |
| Displacement (in³/rev) | 9.7 |
| Port Code | E |
| Series | H Series |
| Rotation | Standard Rotation |
| Mount Type | 2 Bolt |
| Port Type | BSPP |
| Duty | Standard-Duty |
| RPM [Max] | 353 rpm |
| Flow Rate | 14 gal/min |
| Motor Type | Spool Valve |
| Mounting Type Code | A |
| Motor Element | Gerotor |
| Output Shaft Code | 24 |
| Inlet Pressure [Max] | 2500 psi |
| Weight | 13.0 LB |
