Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 5.86 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| RPM [Max] | 585 rpm |
| Paint Code | A |
| Flow [Max] | 15 gal/min |
| Bolt Circle Dia. | 4.187 in |
| Mounting Holes | 0.535 in |
| Splines | 0 |
| Duty | Standard-Duty |
| Port Type | BSPP |
| Seal Material | Buna-N |
| Output Torque at Rated PSI (inch/pounds) | 1372 in lb |
| Series | H Series |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Pilot Diameter | 3.25 in |
| Flow Rate | 14 gal/min |
| Case Drain Code | 2 |
| Output Shaft Code | 24 |
| Motor Element | Gerotor |
| Mounting Hole Size | 0.565 in |
| RPM [Min] | 585 rpm |
| Special Features | None |
| Mounting Type Code | A |
| Port Code | E |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Flange Orientation | Standard |
| Shaft Type | Straight |
| Corrosion Resistant | No |
| Special Features Hardware Code | 00 |
| Material | Cast Iron |
| Displacement (in³/rev) | 5.86 |
| Port Size | 1/2, G 1/2 |
| Port Location | Side Port |
| Mount Type | 2 Bolt |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Shaft Size & Type | Straight |
| Pressure [Max] | 1800 psi |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Assembly Code | 0 |
| Weight | 13.0 LB |
